Description
The GX7-400 Gun is the same as a standard GX-7, but features a shorter stroke length. This is important for fast-setting polyureas because the material spends less time in the gun.
Ideal for low to medium output foam applications.
- A variety of mixing chamber sizes allows the operator to fine-tune the round spray pattern for virtually any application
- Lightweight, easy to operate and maintain
- Mechanically self-cleaning so you eliminate costly solvent-flushing
- Air cap allows for easy cleaning of the purge rod
- Lightweight design reduces operator fatigue
- Pattern control knob allows for fine tune adjustments
SPECIFICATIONS
Technical Specifications
| Air Inlet Size (in) | 1/4 |
|---|---|
| Air Inlet Thread Type | NPT |
| Compatible Material | Polyurethane, Roof Coating, Plural Component Protective Coating, Polyurea, Elastomeric Coating, Spray Polyurethane Foam |
| Component A Inlet Size (in) | 1/2-20 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (in) | 9/16 |
| Component B Inlet Thread Type | UNF |
| Gun Activation | Manual |
| Gun Type | Mechanical-Purge |
| Gun Weight (lb) | 4.1 |
| Includes | Mix Module, Tip |
| Maximum Air Inlet Pressure (MPa) | 0.86 |
| Maximum Air Inlet Pressure (psi) | 125 |
| Maximum Air Pressure (MPa) | 0.86 |
| Maximum Air Pressure (psi) | 125 |
| Maximum Flow Rate (lb/min) | 8 |
| Maximum Fluid Pressure (MPa) | 24 |
| Maximum Fluid Pressure (psi) | 3500 |
| Maximum Fluid Working Pressure (MPa) | 24 |
| Maximum Fluid Working Pressure (psi) | 3500 |
| Minimum Air Inlet Pressure (MPa) | 0.7 |
| Minimum Air Inlet Pressure (psi) | 100 |
| Minimum Flow Rate (lb/min) | 3.5 |
| Model | GX-7 |
| Overall Height (in) | 9.5 |
| Overall Length (in) | 9 |
| Overall Width (in) | 4.5 |
| Pattern Size (in) | 16 in @ 18 in from target |
| Pressure Type | High Pressure |
| Purge Method | Mechanical |
| Series | 400 |
| Spray Gun Mix Type | Impingement |
| Spray Pattern | Fan |
| Type | Spray Gun |
| Wetted Parts | Aluminum , Stainless Steel, Plated Carbon Steel, Fluorocarbon O-Rings |
Reviews
There are no reviews yet.