Graco A-XP1 Reactor, 3500psi – 1.5 gal/min – Pneumatic

Description

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality coating.

For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy to operate and maintain
• Best choice for affordability and durability
• Three Heat Zones
  • Three independent heat zones – ISO, resin and hose heat
  • Provide accurate heat control for reliable spraying to handle different chemical viscosities
  • Digital temperature controls
• Three Heat Zones
  • Three independent heat zones – ISO, resin and hose heat
  • Provide accurate heat control for reliable spraying to handle different chemical viscosities
  • Digital temperature controls
• Recirculation Manifold
  • A quick, easy way to balance system pressures
• NXT® Air Motor
  • Low air consumption for increased efficiency
  • Muffler provides low operating noise levels
  • Air valve provides smooth and rapid changeover
• ISO Pump Lube System
  • Prevents isocyanate crystallization on the pump seal and shaft
• Hybrid Heater
  • Provides better temperature control

• Technical Specifications

  Air Inlet Size (in)	1/2
  Air Inlet Thread Gender	Female
  Air Inlet Thread Type	NPT
  Amperage (A)	26 @ 380 V ac (3-Phase WYE), 45 @ 230 V ac (3-Phase Delta), 56 @ 230 V ac (1-Phase)
  Application	Protective Coatings
  Applicator Type	Manual
  Compatible Material	Plural Components
  Component A Inlet Size (in)	3/4
  Component A Thread Gender	Female
  Component A Thread Type	NPT
  Component B Inlet Size (in)	3/4
  Component B Thread Gender	Female
  Component B Thread Type	NPT
  Component Type	Two Component
  Flush Type	Solvent
  Frequency (Hz)	50/60
  Includes	Proportioner, Heated Hose, Wheels, DataTrak
  Material Application	Polyurea
  Maximum Air Consumption (SCFM)	32 scfm at 2000 psi
  Maximum Air Inlet Pressure (psi)	125
  Maximum Flow Rate (GPM)	1.5
  Maximum Flow Rate (cc/min)	5680
  Maximum Fluid Temperature (°F)	190
  Maximum Fluid Viscosity (cP)	1500
  Maximum Hose Length (ft)	210
  Maximum Mix Ratio	1:1
  Maximum Working Pressure (MPa)	24
  Maximum Working Pressure (psi)	3500
  Minimum Fluid Viscosity (cP)	250
  Overall Depth (in)	30
  Overall Height (in)	43.5
  Overall Width (in)	29
  Phase	1, 3
  Power Rating (HP)	17.43
  Power Rating (W)	13000
  Power Rating (kW)	13
  Power Source	Air
  Pressure Type	High Pressure
  Product Type	Plural Component
  Sound Power Level (dB(A))	80.1
  Sound Pressure Level (dB(A))	70.2
  Type	Proportioning System
  Weight (lb)	310
  Wetted Material	Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon