Description
A variety of mixing chamber sizes allows the operator to fine-tune the round spray pattern for virtually any application. Lightweight, easy to operate and maintain. Mechanically self-cleaning so you eliminate costly solvent-flushing.
The Graco D-Gun is ideal for small to midrange output foam applications such as interior stud-wall spraying.
- Air cap allows for easy cleaning of the purge rod
- Lightweight design reduces operator fatigue
- Pattern control knob allows for fine tune adjustments
SPECIFICATIONS
| Air Inlet Size (in) | 1/8 |
|---|---|
| Air Inlet Thread Type | NPT |
| Compatible Material | Spray Polyurethane Foam |
| Component A Inlet Size (in) | 1/2-20 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (in) | 9/16 |
| Component B Inlet Thread Type | UNF |
| Gun Activation | Manual |
| Gun Type | Mechanical-Purge |
| Gun Weight (lb) | 3.1 |
| Maximum Air Inlet Pressure (MPa) | 0.75 |
| Maximum Air Inlet Pressure (psi) | 110 |
| Maximum Air Pressure (MPa) | 0.75 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Flow Rate (lb/min) | 16 |
| Maximum Fluid Pressure (MPa) | 7 |
| Maximum Fluid Pressure (psi) | 1000 |
| Maximum Fluid Working Pressure (MPa) | 6.9 |
| Maximum Fluid Working Pressure (psi) | 1000 |
| Minimum Air Inlet Pressure (MPa) | 0.6 |
| Minimum Air Inlet Pressure (psi) | 90 |
| Minimum Flow Rate (lb/min) | 2 |
| Model | D-Gun |
| Overall Height (in) | 9.25 |
| Overall Length (in) | 8 |
| Overall Width (in) | 2.4 |
| Pattern Size (in) | 8 in @ 18-20 in from target |
| Pressure Type | Low Pressure |
| Purge Method | Mechanical |
| Series | Standard |
| Type | Spray Gun |
| Wetted Parts | Stainless Steel, Carbon Steel, Brass, Nylon, Acetal, PTFE |
311320EN-K
Reviews
There are no reviews yet.